6 .156" x .200" series 6022/6024 rectangular tails series 6007 contacts features extended card guides ribbon-type contacts with bifurcated nose choice of terminations: solder (wire hole and p.c. tab), or low-cost solderless wrap contacts for 1/16" p.c. card specifications current rating: 5 amperes contact resistance: 6 milliohms, maximum contact material: phosphor bronze contact plating:* overall: 50-100 microinches nickel and 10 microinches min. gold overall insertion/withdrawal force: 2 to 16 ounces per contact pair, nominal p.c. card insulator material: polyester per ul 94vo insulation resistance: 5000 megohms, minimum dielectric withstanding voltage: 1800 vac between adjacent contacts, rms, at sea level ordering code typical example 00 6022 044 450 001 series 6022 6024 number of contacts 6022 6024 * for other type platings and thicknesses please consult factory. contact code single read-out *457 60-6007-06-53 wire hole special: .227" lg. (2 term.) 551 60-6007-16-23 wire hole (single sided): .277" lg. 552 60-6007-16-33 p.c. tab (single sided): .202" lg. *936 60-6007-06-43 wrap (.016" x .047") special: .497" lg. *938 60-6007-06-33 p.c. tab special: .215" lg. *940 60-6007-06-23 wire hole special: .227" lg. dual read-out 1 450 60-6007-19-23 wire hole: .277" lg. 451 60-6007-19-33 p.c. tab: .202" lg. 452 60-6007-18-13 solderless wrap (.016" x .044"): .697" lg. 453 60-6007-18-23 p.c. tab: .347" lg. 454 60-6007-18-33 solderless wrap (.016" x .044"): .517" lg. *498 60-6007-05-33 switching (used in pairs): .202" lg. p.c. tab *941 60-6007-05-13 switching (used in pairs): .229" lg. wire hole single readout dual readout 22 44 single readout dual readout 18 36 variation code 6022 plating overall 001 44 dual read-out contacts installed in all positions 002 22 single read-out contacts installed on numbered side only (551, 552, 936, 938, 940) 003 22 single read-out contacts installed on lettered side only (551, 552, 936, 938, 940) 004 22 single read-out contacts installed staggered starting with position 1, b, 3, d, etc. (936, 938, 940 only) 005 22 single read-out contacts installed staggered starting with position a, 2, c, 4, etc. (936, 938, 940 only) polarization ordering polarizing insert separately by part number b type: 60-6002-3124 c type: 60-6007-3314 d type: 60-6061-3118 6024 plating overall 001 dual read-out contacts 002 single read-out contacts with tails in position ??to ?8 (551, 552, 936, 938, 940) 003 single read-out contacts with tails in positions ??to ?? (551, 552, 936, 938, 940) 004 single read-out contacts with tails in positions 1-b-3, etc. (936, 938, 940 only) 005 single read-out contacts with tails in positions a-2-c, etc. (936, 938, 940 only) polarization ordering polarizing insert separately by part number a type: fits between contacts 60-6002-31-24 b type: eliminates one contact position 60-6007-33-14
|
